sigmoid.social is one of the many independent Mastodon servers you can use to participate in the fediverse.
A social space for people researching, working with, or just interested in AI!

Server stats:

595
active users

#Lasercutter

0 posts0 participants0 posts today
Bose-Einstein-Kondensat<p>Open Lab Starter Kit Small Laser V2 - An <a href="https://mstdn.social/tags/OpenSource" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>OpenSource</span></a> <a href="https://mstdn.social/tags/FabLab" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>FabLab</span></a> produced <a href="https://mstdn.social/tags/LaserCutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>LaserCutter</span></a>:</p><p>- 40 W CO2 <a href="https://mstdn.social/tags/laser" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>laser</span></a> cutter<br>- materials: plywood, acrylics &amp; MFD<br>- cutting area of 400 mm x 600 mm<br>- <a href="https://mstdn.social/tags/ATtiny" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>ATtiny</span></a> / <a href="https://mstdn.social/tags/Teensy" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Teensy</span></a> -controlled</p><p><a href="https://doi.org/10.1016/j.ohx.2025.e00664" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">doi.org/10.1016/j.ohx.2025.e00</span><span class="invisible">664</span></a><br><a href="https://mstdn.social/tags/OLSK" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>OLSK</span></a> <a href="https://mstdn.social/tags/DIYbio" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>DIYbio</span></a> <a href="https://mstdn.social/tags/lab" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lab</span></a> <a href="https://mstdn.social/tags/instruments" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>instruments</span></a> <a href="https://mstdn.social/tags/Maker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Maker</span></a> <a href="https://mstdn.social/tags/hackerspace" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>hackerspace</span></a> <a href="https://mstdn.social/tags/DIYtech" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>DIYtech</span></a> <a href="https://mstdn.social/tags/DIY" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>DIY</span></a></p>
Hacklabor<p>🔧&nbsp;OFFENE WERKSTATT im Hacklabor 🔧<br>📅&nbsp;Samstag, 12.07.2025<br>🕐&nbsp;12:00 - 17:00 Uhr<br>Lust auf Basteln, Tüfteln und Erschaffen? Kommt vorbei und nutzt unsere voll ausgestattete Werkstatt!<br>Egal ob Anfänger oder Profi - bringt eure Ideen mit und macht sie Realität! Perfekt für eigene Projekte oder um einfach mal was Neues auszuprobieren.<br>Eintritt frei | Keine Anmeldung erforderlich<br><a href="https://chaos.social/tags/Hacklabor" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Hacklabor</span></a> <a href="https://chaos.social/tags/OffeneWerkstatt" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>OffeneWerkstatt</span></a> <a href="https://chaos.social/tags/Makerspace" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Makerspace</span></a> <a href="https://chaos.social/tags/DIY" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>DIY</span></a> <a href="https://chaos.social/tags/3DDruck" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>3DDruck</span></a> <a href="https://chaos.social/tags/Lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Lasercutter</span></a> <a href="https://chaos.social/tags/Elektronik" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Elektronik</span></a> <a href="https://chaos.social/tags/Holzbearbeitung" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Holzbearbeitung</span></a></p>
Makerspace Esslingen e.V.<p>Am 12. Juli gibt es einen Lasercutter Workshop. Von 15 bis 18 Uhr (open end) zeigen wir wie man mit Lasercuttern umgeht.</p><p>Vom Entwurf bis zum fertigen Werkstück ist alles dabei. Du brauchst keine Vorkenntnisse: Wir zeigen dir, was du wissen musst, um sicher und kreativ mit dem Lasercutter zu arbeiten.</p><p>Bitte melde dich über Mastodon oder unter anmeldung@makerspace-esslingen.de an.</p><p>Mehr Infos: www.essembly.de <br><a href="https://mastodon.social/tags/Makerspace" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Makerspace</span></a> <a href="https://mastodon.social/tags/EsslingenamNeckar" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>EsslingenamNeckar</span></a> <a href="https://mastodon.social/tags/EsslingenMaker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>EsslingenMaker</span></a> <a href="https://mastodon.social/tags/LinuxCafe" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>LinuxCafe</span></a> <a href="https://mastodon.social/tags/Maker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Maker</span></a> <a href="https://mastodon.social/tags/Lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Lasercutter</span></a> <a href="https://mastodon.social/tags/CNC" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>CNC</span></a></p>
IT News<p>Solder Stencil Done Three Ways - This project, sent in by [Henk], goes through a few different ways to make a solde... - <a href="https://hackaday.com/2025/06/06/solder-stencil-done-three-ways/" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">hackaday.com/2025/06/06/solder</span><span class="invisible">-stencil-done-three-ways/</span></a> <a href="https://schleuss.online/tags/solderstencil" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>solderstencil</span></a> <a href="https://schleuss.online/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> <a href="https://schleuss.online/tags/vinylcutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>vinylcutter</span></a> <a href="https://schleuss.online/tags/fiberlaser" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>fiberlaser</span></a> <a href="https://schleuss.online/tags/pcbhacks" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>pcbhacks</span></a></p>
Arne<p>Könnt Ihr <a href="https://chaos.social/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> für zu Hause empfehlen. Wichtigste Kriterien wären für mich:<br>- Machen gut was sie sollen <br>- Gehen nicht gleich kaputt <br>- Lassen sich gut verstauen, wenn sie gerade nicht gebraucht werden </p><p>Ich würde mich sehr über Eure Tipps freuen.</p><p>(Bitte nur echte Emphlungen, Web-Suche habe ich schon selber gemacht.)<br><a href="https://chaos.social/tags/lasercut" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercut</span></a> <a href="https://chaos.social/tags/diy" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>diy</span></a></p>
balkonsolar<p>Tag der offenen Tür im FreiLab: Hier wird unter anderem das ultimative <a href="https://freiburg.social/tags/Steckersolar" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Steckersolar</span></a> Auslese Display gezeigt. </p><p>Der Code ist auf GitHub: <a href="https://GitHub.com/jrmfrbg" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="">GitHub.com/jrmfrbg</span><span class="invisible"></span></a></p><p>„Lieber Scholli“ Repository: <a href="https://GitHub.com/jrmfrbg/MeinLieberScholli" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">GitHub.com/jrmfrbg/MeinLieberS</span><span class="invisible">cholli</span></a></p><p>Und natürlich gibt es auch noch: <a href="https://freiburg.social/tags/Lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Lasercutter</span></a>, <a href="https://freiburg.social/tags/3DDrucker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>3DDrucker</span></a>, Infos für die neue <a href="https://freiburg.social/tags/offeneWerkstatt" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>offeneWerkstatt</span></a> im Quartier <a href="https://freiburg.social/tags/Kleineschholz" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Kleineschholz</span></a>, <a href="https://freiburg.social/tags/Amiga" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Amiga</span></a> C64, <a href="https://freiburg.social/tags/Grillen" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Grillen</span></a>, <a href="https://freiburg.social/tags/L%C3%B6ten" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Löten</span></a>, Holz, Kuchen &amp; Lupinencafe.</p><p>Im FreiLAB in <a href="https://freiburg.social/tags/Freiburg" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Freiburg</span></a> (Ensisheimerstr gegenüber <a href="https://freiburg.social/tags/Eisstadion" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Eisstadion</span></a>): Tag der offenen Tür (bis 16:00)!</p><p><a href="https://youtube.com/shorts/GZafNx650Vg?si=x-OredCH0kOuMZh4" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">youtube.com/shorts/GZafNx650Vg</span><span class="invisible">?si=x-OredCH0kOuMZh4</span></a></p>
Sebastian Müller<p>Jetzt im <a href="https://freiburg.social/tags/FreiLAB" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>FreiLAB</span></a> in <a href="https://freiburg.social/tags/Freiburg" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Freiburg</span></a> (Ensisheimerstr gegenüber <a href="https://freiburg.social/tags/Eisstadion" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Eisstadion</span></a>): Tag der offenen Tür (bis 16:00)!</p><p>Mit <a href="https://freiburg.social/tags/Lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Lasercutter</span></a>, <a href="https://freiburg.social/tags/3DDrucker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>3DDrucker</span></a>, Energiemonitor für <a href="https://freiburg.social/tags/BalkonSolar" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>BalkonSolar</span></a>, Infos für die neue <a href="https://freiburg.social/tags/offeneWerkstatt" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>offeneWerkstatt</span></a> im Quartier <a href="https://freiburg.social/tags/Kleineschholz" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Kleineschholz</span></a>, <a href="https://freiburg.social/tags/Amiga" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Amiga</span></a> C64, <a href="https://freiburg.social/tags/Grillen" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Grillen</span></a>, <a href="https://freiburg.social/tags/L%C3%B6ten" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Löten</span></a>, Holz, Kuchen &amp; Lupinencafe.</p>
Tobi Weh · NDS<p>Moin <a href="https://bildung.social/tags/FediLZ" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>FediLZ</span></a> und <a href="https://bildung.social/tags/maker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>maker</span></a>,<br>Hat jemand Empfehlungen für einen preiswerten und zuverlässigen <a href="https://bildung.social/tags/Laser" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Laser</span></a>-Schneider für die Schule. Bei der Schnittfläche reicht mir was in der Größenordnung von 400x400mm^2 und schneiden will ich vor allem Sperrholz und MDF (vielleicht bis 10 oder 12mm) und transparentes Acryl wär gut, Metall muss nicht sein.<br>Danke!</p><p><a href="https://bildung.social/tags/Makerspace" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Makerspace</span></a> <a href="https://bildung.social/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a></p>
xro<p>Im Seminarraum 14 (SR14) findet das MakerCamp des <a href="https://chaos.social/tags/BCG25" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>BCG25</span></a> statt.</p><p>Aktuell ein cooler live demo workshop, wie man Titanium farb laser graviert (bei verschiedenen Temperaturen oxidiert).</p><p>Verwendet wird ein IR-Diode laser.</p><p>Nebenbei druckt ein 3D Drucker einen Hinweis auf die <a href="https://chaos.social/tags/realraum" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>realraum</span></a> Party nächsten Samstag 😁 24.5. mit Musik ab 19h</p><p><a href="https://chaos.social/tags/BarCampGraz" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>BarCampGraz</span></a> <a href="https://chaos.social/tags/BarCamp" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>BarCamp</span></a> <a href="https://chaos.social/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a></p>
IT News<p>“Man and Machine” vs “Man vs Machine” - Every time we end up talking about 3D printers, Al Williams starts off on how bad ... - <a href="https://hackaday.com/2025/05/10/man-and-machine-vs-man-vs-machine/" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">hackaday.com/2025/05/10/man-an</span><span class="invisible">d-machine-vs-man-vs-machine/</span></a> <a href="https://schleuss.online/tags/artificialintelligence" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>artificialintelligence</span></a> <a href="https://schleuss.online/tags/hackadaycolumns" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>hackadaycolumns</span></a> <a href="https://schleuss.online/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> <a href="https://schleuss.online/tags/machine" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>machine</span></a> <a href="https://schleuss.online/tags/mastery" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>mastery</span></a> <a href="https://schleuss.online/tags/rants" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>rants</span></a> <a href="https://schleuss.online/tags/art" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>art</span></a></p>
viq<p>I was looking for ideas for creating a <a href="https://social.hackerspace.pl/tags/travel" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>travel</span></a> case for my <a href="https://social.hackerspace.pl/tags/ereader" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>ereader</span></a>, and someone suggested looking up "box joint generator" for plywood, and indeed looks like <a href="https://boxes.hackerspace-bamberg.de/SlidingLidBox?language=en" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">boxes.hackerspace-bamberg.de/S</span><span class="invisible">lidingLidBox?language=en</span></a> (probably with the lip for lid) might be exactly what I'm looking for! So now to figure out where to get plywood for it and how to work the <a href="https://social.hackerspace.pl/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> at the <a href="https://social.hackerspace.pl/tags/hackerspace" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>hackerspace</span></a> 😅<br><a href="https://social.hackerspace.pl/tags/DYI" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>DYI</span></a></p>
Michael K Johnson<p>Today I deleted and blocked a forum spammer whose email address started with "seo"</p><p>Props for honesty, I suppose? Most of the spammers try to astroturf one way or another, like the floods of <a href="https://social.makerforums.info/tags/Monport" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Monport</span></a> <a href="https://social.makerforums.info/tags/laserCutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>laserCutter</span></a> spam I delete and then Monport sanctimoniously claim oh no they would <em>never</em> do a thing like that. 🙄</p>
Andrew Crawford<p>This little display stand is an experimental prototype inspired by having made some tiny rechargeable lights. Lit from below, the 1-inch acrylic cube transmits the light to provide under-lighting for whatever sits on top of it. This could likely be done better with a custom circuit board with surface mount LEDs, but this was a fun way to make a quick one-off prototype without fabricating boards.</p><p><a href="https://mastodon.cloud/tags/Electronics" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Electronics</span></a> <a href="https://mastodon.cloud/tags/Maker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Maker</span></a> <a href="https://mastodon.cloud/tags/LaserCut" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>LaserCut</span></a> <a href="https://mastodon.cloud/tags/LaserCutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>LaserCutter</span></a> <a href="https://mastodon.cloud/tags/Acrylic" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Acrylic</span></a></p>
Justin D Kruger (he/him)<p><a href="https://me.dm/tags/AstroAtomica" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>AstroAtomica</span></a> <br>We just updated the thumbnail for our previous live stream. How do you like it?</p><p><a href="https://me.dm/tags/Lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Lasercutter</span></a> <a href="https://me.dm/tags/Maker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Maker</span></a> <a href="https://me.dm/tags/Crafting" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Crafting</span></a><br><a href="https://me.dm/tags/YouTube" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>YouTube</span></a> <a href="https://me.dm/tags/Thumbnail" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Thumbnail</span></a> <br><a href="https://me.dm/tags/YouTuber" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>YouTuber</span></a> <a href="https://me.dm/tags/Livestream" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>Livestream</span></a> </p><p><a href="http://youtube.com/post/Ugkx0bjHeEAdb2J_X4HbbZBVkoh4BWor0Wwp?si=_NxPPWh2mdFiPUuD" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">http://</span><span class="ellipsis">youtube.com/post/Ugkx0bjHeEAdb</span><span class="invisible">2J_X4HbbZBVkoh4BWor0Wwp?si=_NxPPWh2mdFiPUuD</span></a></p>
IT News<p>Classy Paper Tape Reader Complements Homebrew Retrocomputer - If you were one of the earliest of early adopters in the home computing revolution... - <a href="https://hackaday.com/2025/03/11/classy-paper-tape-reader-complements-homebrew-retrocomputer/" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">hackaday.com/2025/03/11/classy</span><span class="invisible">-paper-tape-reader-complements-homebrew-retrocomputer/</span></a> <a href="https://schleuss.online/tags/retrocomputing" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>retrocomputing</span></a> <a href="https://schleuss.online/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> <a href="https://schleuss.online/tags/tapestorage" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>tapestorage</span></a> <a href="https://schleuss.online/tags/papertape" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>papertape</span></a></p>
henk ✅<p>Will try to share some of the awesome stuff that students make while doing <a href="https://waag.social/tags/fabacademy" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>fabacademy</span></a> Last week it was <a href="https://waag.social/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> week: Mkhitar from <a href="https://waag.social/tags/fablab" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>fablab</span></a> Dilijan (Armenia) came up with this brilliant idea to laser joints in an angle.</p><p><a href="https://fabacademy.org/2025/labs/dilijan/students/mkhitar-evoyan/assignments/week03/#angled-version" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">fabacademy.org/2025/labs/dilij</span><span class="invisible">an/students/mkhitar-evoyan/assignments/week03/#angled-version</span></a></p>
Billy Smith<p>A new OSHW lasercutter design from one of the LHS members:</p><p><a href="https://www.youtube.com/watch?v=hKLUTKVeXzE" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://www.</span><span class="ellipsis">youtube.com/watch?v=hKLUTKVeXz</span><span class="invisible">E</span></a></p><p>Github repo here:</p><p><a href="https://github.com/kpatel122/Sparks-Laser-Cutter" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">github.com/kpatel122/Sparks-La</span><span class="invisible">ser-Cutter</span></a></p><p><a href="https://social.coop/tags/oshw" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>oshw</span></a> <a href="https://social.coop/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> <a href="https://social.coop/tags/tools" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>tools</span></a></p>
IT News<p>Paper Tape – With LASERs! - Though it is many decades since paper tape was commonly used as a data input or st... - <a href="https://hackaday.com/2025/01/29/paper-tape-with-lasers/" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">hackaday.com/2025/01/29/paper-</span><span class="invisible">tape-with-lasers/</span></a> <a href="https://schleuss.online/tags/retrocomputing" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>retrocomputing</span></a> <a href="https://schleuss.online/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> <a href="https://schleuss.online/tags/papertape" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>papertape</span></a> <a href="https://schleuss.online/tags/punchtape" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>punchtape</span></a></p>
IT News<p>A Little Pigment Helps with Laser Glass Engraving - The range of materials suitable for even the cheapest laser cutter is part of what... - <a href="https://hackaday.com/2025/01/28/a-little-pigment-helps-with-laser-glass-engraving/" rel="nofollow noopener" translate="no" target="_blank"><span class="invisible">https://</span><span class="ellipsis">hackaday.com/2025/01/28/a-litt</span><span class="invisible">le-pigment-helps-with-laser-glass-engraving/</span></a> <a href="https://schleuss.online/tags/titaniumdioxide" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>titaniumdioxide</span></a> <a href="https://schleuss.online/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> <a href="https://schleuss.online/tags/laserhacks" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>laserhacks</span></a> <a href="https://schleuss.online/tags/engraving" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>engraving</span></a> <a href="https://schleuss.online/tags/glue" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>glue</span></a> <a href="https://schleuss.online/tags/tio2" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>tio2</span></a> <a href="https://schleuss.online/tags/cnc" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>cnc</span></a> <a href="https://schleuss.online/tags/pva" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>pva</span></a></p>
mmcm<p>Hello <a href="https://mastodon.social/tags/lasercutter" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>lasercutter</span></a> / <a href="https://mastodon.social/tags/maker" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>maker</span></a> community! I'm preparing a stencil right now using <a href="https://mastodon.social/tags/inkscape" class="mention hashtag" rel="nofollow noopener" target="_blank">#<span>inkscape</span></a> and I *think* I have everything done correctly, but I'm wondering: are the tools to "lint" my svg before cutting? I'd hope to find something that tells me things like...</p><p>* here you have two lines superposed, this will result in a double cut<br>* here you have a lot of waypoints within 0.1mm of each other, likely won't come out good<br>* this svg feature is likely not supported by laser cutters</p><p>Any pointers? 🙂</p>