Nach über 10 Jahren erfolgreichen Einsatzes brauchte das #Pedalboard mal ein Upgrade. Mehr Power, Delay mit bpm genauen Presets und Gitarrenfunk.
Leider hörte das #Shure Pedal während des Umbaus auf zu funktionieren. Kommt wohl vom harten „seit halbem Jahr auf Einsatz warten“ im Regal.
#thomann Kundenservice - zu Hülf! 
PS:
Das Strymon Delay klingt um Welten besser. Das Line6 HX One ist aber leider so verdammt praktisch 
BREAKING: Shure Axient Digital PSM has just won an NAB Best of Show Award in the MIX category!
(I did the FPGA design.)
@geerlingguy Swing past the #Shure booth and check out the ADXR PSM system that I helped design.
Tell them Nick Dietz sent you. :-)
https://nab25.mapyourshow.com/8_0/floorplan/?st=exhibitorname&sv=shure&hallID=B&selectedBooth=N1129
I realized virt-viewer doesn't let me click on the 'circled blue i' button to configure the vm.
This command works though:
virt-manager --connect qemu+ssh://elgar.local/system
I need this because it seems that virtual USB doesn't recover from a device reboot when using the the #shure update utility under a windows VM. So I have to manually disconnect and re-add the usb hardware when it gets stuck at 90%
I doubt this is a Shure bug. Workaround anyone?
I don't know who needs to hear this, but #Shure #WirelessWorkbench works flawlessly on #Linux under #Wine.
You don't need windows and m$ to setup racks of wireless microphone receivers.
Pondering a #podcast setup, needs for 2-4 persons, but up to 6 should be good, individually recorded tracks and personal headphones for monitoring.
So, multitrack usb audio interface, headphone amp and microphones. #shure #behringer
Any recommendations?
I'm so proud! #Sennheiser never would have allowed a #garage-built #proton-pack to make it in to their behind-the-scenes video! (That's me starting at 2:36)
https://www.youtube.com/watch?v=tZZmv2LQ-Es
For contrast, don't miss the Sennheiser #Spectera video.
https://www.youtube.com/watch?v=Qvi36Lq4eHc
#Shure #IEM #wireless #electronics #telemetry
I'm doing the next generation protonpack #fpga telemetry system as an #opensource #openhardware design.
Team #mastodon will help me out, right?
@ErickaSimone praying for you. good luck!
I can't say anything is a match, but #Shure has some current non-US job listings. Put my name down as a reference.
I just ran across these pictures from my last #shure prototype. This was an #rf #pll board. We needed a shield and I decided we could use #kicad and some brass sheet stock from #mcmaster to build a custom shield. I drew it in kicad on the am and had a shield cut on the #laser #lpkf machine in our #Niles #illinois office by afternoon and I bent and soldered it straight away. #electronics #freecad
Internal to the #Axient #Digital #PSM Receiver (ADXR) that #Shure just shipped there is, unsurprisingly, a programming header
that exposes #serial, #JTAG, etc. It is in violation of (Murphy's)[https://en.wikipedia.org/wiki/Edward_A._Murphy_Jr.] law.
This stupid cable has the same connector at both ends, but is electrically asymmetrical. It has no key feature and has no obvious polarity marking on the cable.
I will not allow this mistake to
propagate to the new design.
@nervous_jessica Yes, a "Same same but different" case, this.
Have you run into any "true" counterfeits? I work at #Shure and their products get faked so well that sometimes it's difficult even for Shure engineering staff to tell if they are the real deal or not. They sometimes get sent in for service. And Shure owns their own factories specifically to avoid "overproduction" concerns.
https://ell.stackexchange.com/questions/4087/what-does-same-same-but-different-mean
I'm celebrating a bit, because my employer, #Shure, has announced the product I have been working on, so now I can finally talk about it a bit in public.
Shure ADXR Axent Digital PSM Bodypack Receiver
I may not be allowed to answer, but you may ask me anything! #AMA
#FPGA #Electronics #Wireless #IEM low #latency #digital #modulation #fm #stereo #encryption
#showlink #diversity (the #RF kind)
#Sennheiser #Lectrosonics #Wisycom #homelab
https://www.shure.com/en-US/products/in-ear-monitoring/adpsm/adxr?variant=ADXR%253D-A
@danielglenn Welcome to #chicago. I worked on the modem design for those #shure mics.
He publicado nuevo vídeo en mi canal de Youtube: Nuevo micrófono USB Shure MV6 - Primera Toma de Contacto | Unboxing configuración y prueba de sonido #Shure #MV6 https://www.youtube.com/watch?v=XyTrYhocoFU
@rasteri It's funny to see this in my feed. I just sent a request to my firmware guy at my #shure day-job today requesting that he port doom to a custom firmware image on our next generation portable product that we're about to ship. This of-course would have to be done in our "free time" as nobody would be willing to request official engineering time for this. My boss didn't even know it was a thing.
I sent him this.
https://github.com/ozkl/doomgeneric
maybe this is better?
https://github.com/Daivuk/PureDOOM
@gobborg As a senior in college I refused a second interview with #Raytheon to make round circuit boards to go into missles. I now make round circuit boards to go into microphones for #shure incorporated. #techwontbuildit
@cidney #shure is a privately held company in Niles, Illinois. It recently laid off a bunch of people in anticipation of a lack of growth in the upcoming years. Some of these people had worked there 30+ years. I've been there 23 years and like the work. I'm a EE doing hardware though. I worked in the software department there for years. It was ok. They may be hiring for certain very specific needs, but it's not the wild hiring spree they were on when their predictions of growth were unrealistic.
The #Microphone I've been using for #Sideband (& occasional AM) on the HF bands is a #HeilSound Heritage in chrome.
Quoting bhphotovideo.com, "...produces a frequency response of 50 Hz to 18 kHz with a midrange boost at 4 kHz to increase vocal clarity and instrument brightness."
Just bought a #GreenBullet mic for #BluesHarp use @ a live gig in Oct. Again quoting B&H, "Frequency Range: 100Hz to 5kHz"
Hmm. Maybe the #Shure is an even better mic for SSB?
I should set up an A/B test.
